Description

1977 Ferrari 308 GTB Fibreglass. Chassis number 20489.
One of only 712 of these early 308s in fibreglass and one of only 154 in right hand drive. RHD UK supplied. 
Argento Auteil with Blue Leather. Just fully resprayed by DK Engineering.
Original Leather wallet and books and fantastic history file.

Ownership History – Total Owners (9)
1 - 10.01.1977 – supplied new to by Maltin Car Concessionaires Limited to Mr Pearce Esq
2 - 07.08.1978 – Car purchased by Mr Richards of Cordwallis Non Ferous Metals
6 - 13.11.1983 – car purchased by Mr Woodcock of Carpets International
7 - 10.03.2007 – car purchased by Mr Attwell
8 - 26.07.2013 – car purchased by Mr Youd
9- 21.12.2016 – car purchased by current owner

Service History
05.02.1977 – 500 mile service – Maltin Car Concessionaires
05.02.1977 – 1,550 mile service – Maltin Car Concessionaires
25.03.1977 – 3,000 mile service – Maltin Car Concessionaires
11.12.1977 – 6,000 mile service – Maltin Car Concessionaires
14.05.1978 – 9,500 mile service – Maltin Car Concessionaires
24.08.1979 – 12,500 mile service – Maltin Car Concessionaires
24.08.1979 – 15,000 mile service – Maltin Car Concessionaires
05.02.1981 – 18,000 mile service – 10,180 miles Maltin Car Concessionaires
00.03.1981 – new exhaust manifold 11,490 miles Modena Ferrari
01.11.1982 – 22,000 mile service 13,684 miles – Graypaul Motors
31.10.1984 – Cosmetic repairs 20,279 miles
21.11.1984 – 28,000 mile service M Gosling Engine Tuning
06.12.1985 – Annual service M Gosling Engine Tuning
01.03.1989 – Miscellaneous parts – Evans Halshaw
15.09.2006 – Major service and belts – 25,733 miles – Shiltech Performance Cars
28.02.2007 – Annual Service – 25,733 miles Shiltech Performance Cars
26.04.2007 Miscellaneous parts – Dick Lovett 26,760 miles
22.02.2008 – Annual service – Bob Houghton – 30,334 miles
13.08.2008 – Service work – Dick Lovett – 32,061 miles
28.04.2009 – Annual service and Clutch – 33,023 miles – Dick Lovett
19.02.2010 – Major service and belts – 37,359 miles – Dick Lovett
17.01.2011 – Annual service – 40,247 miles – Dick Lovett
21.03.2012 – Major service and belts – 43,585 miles – Migliore Cars Ltd
20.03.2013 – Replaced spark plugs – 44,210 miles – Nick Cartwright Cars
06.02.2014 – Full overhaul to concours standards – 44,390 miles – Nick Cartwright Cars
07.02.2018 – Major service + belts – 45,290 miles – Bell Classics

Work Carried Out in January 2020 by DK Engineering (bill part of history file)
- Remove all residue from old bonding agent on dash panel. Secure warning lights into dashboard with glue.
- Remove spare wheel and spare wheel compartment, attend to stiff heater controls, adjust angle of cable and lubricate inner cable, find some improvement, find diverter valve pivot to be rusted into the plastic causing it to still be stiff to operate.
- Remove all wheels and arrange for fitted of new year 2019 tyres.
- Renew screen washer bag lid, add screen wash mixture.
- Remove front undertray and heater hose, drain all coolant, disconnect header tank pipes and remove header tank, send header tank to specialist for overhaul. Refit overhauled tank and reconnect pipes. Attend to cause of coolant leaking through inlet manifold studs. Remove airbox, remove engine compartment lid, strip fuel hoses and remove carburettors from inlet manifold. Remove inlet manifold and water manifold, strip old gasket material. Find coolant has dripped into inlet and onto back of the valves, identify this to be cause of poor engine running and apparent ‘flooding’. Clean all mating surfaces and apply thick sealant. Fit new gasket and inlet manifolds and refit carburettors onto engine. Fill cooling system with coolant mixture, bleed system. Run engine and visually inspect for evidence of coolant leaks, find no further leaks to be present.
- Attend to gear selector contacting heater pipe, loosen fastenings on all heater pipework, as required, adjust pipework to new angle through firewall, resecure in position and check for contact with the gear selector.
- Remove driver’s seat and place on the bench. Find release handle for the slider mechanism to have been forcibly turned in the wrong direction, resulting in it becoming bent. Reshape handle and locate spring back into place. Ideally, this seat will need the frame removing and rebuilt with strong spot welds in place to strengthen it. Refit seat.
- Road test car.
- Valet car in preparation for storage.

Labour:
Junior Labour: 2 hours
Labour to collect car from paint shop and deliver to garage: 1.5 hours
Senior Labour: 33.5 hours
Labour to deliver car to unit: 0.5 hours

Parts/Materials:
Door handle cable
Side script badge “Disegno di Pininfarina”
Door hinge pins x 3
Paintshop labour, paint and materials, etc
Michelin XWX 205/’70 BR14 tyres x 4
Washer bag with electric pump
Repair to header tank
Paint shop independent inspection
Body washer M8
Inlet manifold gasket x 2
Gasket x 2
Carburettor base gasket x 8
Nylon nut M8 gold x 20
Flat washer M8 gold x 20
NGK spark plug BP7ES x 8
Wavy washer M8 self colour x 16
Nyloc nuts M8 gold x 16
Hose clamp 32-50mm x 2
Sachet brake paste

MoT History
29.10.1981 – MoT 10,802 miles
03.12.1982 – MoT 14,101 miles
01.12.1983 – MoT 17,795 miles
17.01.1985 – MoT 21,239 miles
27.02.1986 – MoT 23,899 miles
20.09.2006 – MoT 25,742 miles
09.03.2007 – MoT 26,088 miles
18.03.2008 – MoT 30,332 miles
18.03.2009 – MoT 33,006 miles
18.02.2010 – MoT 37,361 miles
20.03.2012 – MoT 43,591 miles
19.03.2013 – MoT 44,209 miles
11.03.2014 – MoT 44,391 miles
21.02.2015 – MoT 44,994 miles
02.05.2017 – MoT 45,277 miles
24.05.2019 – MoT 45,371 miles

Specification

  • Year 1977
  • Mileage 45,000 Miles
  • Exterior Colour Silver
  • Driver Position RHD
  • VIN No. 20489
  • Registration No. YBW462R
  • Price £125,000
Make an Enquiry Call +44 (0)203 752 6550 Back to Stock